Enhance your sporting events with our state-of-the-art stadium audio system. The S10 70-volt 10" outdoor stadium loudspeakers deliver unrivaled speech intelligibility with wide 90° x 90° coverage. Thanks to a weather protection rating of IP66, these speakers can withstand all conditions. Suitable for indoor and outdoor commercial installations, the S6 6.5" 2-way 70-volt surface mount speakers deliver high-quality sound with its weather-resistant ABS enclosure, ensuring powerful sound year-round. The MX9 9-channel rack mixer offers seamless Bluetooth connectivity and built-in effects for wireless music streaming and sound enhancement. At the heart of the system is the DA2500, a 500W dual-impedance rackmount power amplifier that delivers consistent power to the speakers and is easily tuned for optimum performance. Expand your audio playback possibilities with the BTR1 Bluetooth wireless audio receiver, which boasts an extraordinary range of 100 feet. This outdoor stadium sound system also features the reliable PTT1 push-to-talk microphone, ensuring clear play-by-play and announcement commentary.

Ensuring clear speech intelligibility is critical to any sound system, especially in stadium environments where effective communication is critical. Whether adding to the excitement of a heart-pounding sporting event, directing a captivating dance performance, or organizing large gatherings and presentations, this stadium sound system delivers unmatched sound quality, adaptability and ease of use. Designed for seamless, clear communication, this stadium audio setup features a rugged PTT1 tabletop push-to-talk gooseneck microphone. With superior voice capture and adjustable gooseneck positioning, this paging microphone enables presenters to effortlessly speak to audiences with unparalleled clarity and detail. This exceptional configuration seamlessly blends superior sound quality with operational efficiency to elevate the stadium atmosphere.

The Pure Resonance Audio S10 10" outdoor weatherproof stadium loudspeaker is built to withstand exposure to the harshest environmental conditions of outdoor installations while delivering high-quality audio performance. A tough fiber-reinforced plastic and metal housing with a metal grill maintains solid durability and long service life. IP66 rated, this highly weather-resistant speaker is fully protected against dust or dirt particles and direct high-pressure water. The S10 is an ideal solution for background and foreground music, paging, and public address in football and soccer stadiums, sports facilities, athletic centers, arenas, and a wide variety of other challenging indoor and outdoor commercial applications.
 

The Pure Resonance Audio S6 2-way 70-volt surface mount speaker is designed to provide quality audio performance for indoor and outdoor commercial installations. The IP65 weather-resistant rated, UV-protected, and durable ABS enclosure makes the S6 ideal for creating a robust sound atmosphere year-round, indoors and out. This all-weather speaker includes a 6.5" polypropylene woofer and 1" silk membrane tweeter that delivers premium full-range frequency response with a built-in 70V/100V transformer and an 8-ohm bypass. A matching 180-degree mounting bracket allows for quick and easy installation on the wall, under awnings, and overhangs. The S6 is perfect for background and foreground level music, paging, and general-purpose audio where high-quality indoor/outdoor sound is needed.

The Pure Resonance Audio MX9 redefines the rack mount audio mixer, offering versatile mixing, effects, and control of 9 mixing channels, all conveniently packaged in a space-saving 3U chassis. This rack-mounted mixer provides a wide range of inputs with the ability to adapt to virtually any audio source. The MX9 features an onboard 24-bit DSP effects processor, allowing users to quickly and easily add a range of effects to their mixes with simple channel operation. In addition, the generously equipped 9-channel rack mount mixer includes a media player with a display screen that supports Bluetooth audio streaming, MP3, and USB. Featuring an extensive connectivity range for true versatility and professional sound quality, the MX9 is perfect for both fixed installations and mobile rigs.

The Pure Resonance Audio DA2500 is a dual-impedance 2-channel Class-D power amplifier with a built-in high-efficiency selectable impedance power supply. Each powerful 500-watt channel has an independent 70V/4-16Ω switch allowing them to simultaneously use a different impedance, delivering more flexibility in various commercial applications. This high-performance rack mount audio amplifier is a cost-effective solution housed in a standard 1U 19" lightweight chassis. The DA2500 features short-circuit, overload, and overheating protection with cooling fans to provide heat dissipation, maintaining safe operation in environments with long working hours.

 

The Pure Resonance Audio BTR1 Bluetooth wireless audio receiver streams high-fidelity audio to your commercial sound system from any Bluetooth-enabled device. The BTR1 provides superior high-resolution audio streaming with an extended wireless range of up to 100 feet. This Bluetooth stereo receiver is easy to set up, pairs quickly, remembers up to 8 devices, and automatically reconnects to the last paired device. With the latest Bluetooth technology and high-end audio streaming codecs, the BTR1 features an improved signal-to-noise ratio and reduced Bluetooth audio delay. This audio Bluetooth receiver delivers crystal clear, rich sound that retains a full dynamic range for the highest-quality listening experience.

The Pure Resonance Audio PTT1 desktop push-to-talk microphone provides excellent performance and reliability, ideal for paging and announcements in your baseball field sound system. The PTT1 features a uni-directional dynamic gooseneck microphone, table-stand, dual momentary locking switch, 5-foot cable, and three-pin male XLR connector. The durable gooseneck and metal table-stand ensure the PTT1 push-to-talk paging microphone can withstand even the toughest daily use in tough environments.


 

Rated Power Output: 200 Watts

MAX Power: 300 Watts

Frequency Response: 70Hz - 18kHz

Coverage Pattern: 90° x 90°

SPL (@ 1W/1M): 103±3dB

Impedance: 8 Ohms

Transformer Taps: 12.5W, 25W, 50W, 100W, 200W @ 70V
                               25W, 50W, 100W, 200W @ 100V
                               8 Ohm Bypass

Low-Frequency Driver: 10" driver with 3" voice coil

High-Frequency Driver: 1" driver

Protection: Weatherproof IP66

Material: Fiber-reinforced plastic and metal enclosure with metal grill

Mount: Wall mounting bracket supplied

Dimensions (H x W x D): 13.7" (348 mm) x 13.98" (355 mm) x 15.16" (385 mm)

Weight: 31.45 lbs (14.27 kg)

Shipping Dimensions: 15.16" (385 mm) x 17.72" (450 mm) x 17.32" (440 mm)

Shipping Weight: 35 lbs (15.88 kg)

RMS Power Rating: 60 Watt

Frequency Response: 80Hz - 16kHz

SPL (@ 1W/1M): 92 dB

Impedance: 8 Ohms

Transformer Taps: 3.75W, 7.5W, 15W, 30W, 60W @ 70V
                                  7.5W, 15W, 30W, 60W @ 100V
                                  8 Ohm Bypass

Woofer Size: 6.5"

Woofer Material: Polypropylene (PP)

Tweeter Size: 1"

Tweeter Diaphragm Material: Silk membrane

Protection: Water-resistant IP65

Material: ABS enclosure, UV protection, and metal grill

Mount: 180° surface mount bracket

Dimensions (H x W x D):
11.63" (295 mm) x 7.5" (190 mm) x 7.5" (190 mm) without bracket
11.63" (295 mm) x 7.5" (190 mm) x 9.63" (245 mm) with bracket

Weight: 7.9 lbs (3.6 kg)                                                                                                                                                                                                                                                                    

Mic (XLR) Inputs: (7) XLR jacks

Line Level Inputs: (7) ¼" TRS jacks

Inserts: (7) ¼" TRS jacks

Pre-Fader Listen: Each channel has its own individual PFL switch

Outputs: (1) Set of XLR (L & R), (1) Set of ¼" TRS (L & R), (1) ¼" AUX Out, (1) ¼" FX Out, (1) ¼" Headphone monitor output

Effects: 24-bit DSP Effects Processor

Phantom Power Supply: +48V option (Ch 1-7)

Frequency Response: 20Hz - 20kHz, ± 3 dB

Distortion: <0.003% (A-weighted)

Microphone Balance Input Noise: -119 dB (A-weighted)

Signal-to-Noise Ratio: 60 dB

Single Channel Input Gain: MIC: 0 to 48 dB, LINE: -33 to +15 dB

Maximum Output Level: +20 dBu

Mic Input High Pass Filter: 75Hz, 18dB/OCT

Single-Channel Equalization: High-frequency: ± 15 dB @ 12kHz; mid-frequency: ±12 dB @ 2.5kHz; Low-frequency: ±15 dB @ 80Hz

Power: Built-in switching power adapter 110-220V, 30W

Power Consumption: ≤23W

Dimensions (H x W x D): 5.51" (140 mm) x 19" (483 mm) x 9.45" (240 mm)

Weight: 8.82 lbs (4 kg)

Rated Power Output: 2 x 500W at 70V, 500W at 4 Ohm, 250W at 8 Ohm

Speaker Outputs: 70V / 4~16Ω

Input Sensitivity: ±385mV/20kΩ, balanced input

Frequency Response: 80Hz~16kHz (+1 dB,-3 dB)

S/N Ratio: ≥95 dB

THD: ≤0.1% (at 1kHz, 1/3 rated power)

Control: Power control and fault indication remote monitoring via Euroblock connection

Indicator Light: Signal, peak clipping, protection, and power supply

Protection: High temperature, overload, short-circuit

Cooling: Fan-forced cooling

Power Consumption: 1200W

Power Supply: ~110-120V 60Hz

Dimensions (H x W x D): 1.73" (44 mm) x 19.05" (484 mm) x 12.4" (315 mm)

Weight: 10.8 lbs (4.9 kg)

Bluetooth® Version: Bluetooth V5.0

Supported Codecs: Qualcomm® aptX™,  aptX™ HD, aptX™ LL, AAC, and SBC

Bluetooth® Range: 100 feet (30 meters)

Input: Bluetooth

Outputs: Stereo Analog RCA, Digital Optical (S/PDIF)

Input Power: 5V, 200 mA

Output Voltage: 2.1 Volts RMS

Output Impedance: 57 Ohms

D/A Converter: PCM5102A

Frequency Response: 10Hz - 20kHz (+/- 0.5 dB)

Signal to Noise Ratio: 112 dB

Total Harmonic Distortion: -93 dB

PCM Support: 384kHz / 32bit

Enclosure: Aluminum

Dimensions (H x W x D): 0.87" (22 mm) x 3.54" (90 mm) x 3.74" (95 mm)

Weight: 0.35 lbs (0.16 kg)                                                                                                                                                              

Polar Pattern: Uni-directional

Frequency Response: 80Hz~12kHz

Impedance: 600Ω ± 30%

Sensitivity: -72dB ± 3dB

Connector: 3-pin male XLR 

Housing: Die-Cast Zinc

Cable: 1.5M (approx. 5')

Dimensions: 6.38" (162 mm) x 4.8" (122 mm) x 14.49" (368 mm)

Weight (without cable): 1.87 lbs (0.85 kg)