Create the perfect atmosphere in your office or clinic by seamlessly streaming background music through your Bluetooth-enabled device. This office sound system combines six 2x2 drop tile ceiling speakers with a powerful 120-watt Bluetooth rack mount mixer amplifier and a push-to-talk paging microphone. Ideal for various settings including dental offices, private practice doctor offices, chiropractic offices, and veterinary clinics, the SP8 ceiling speakers feature a slim mounting depth of only 3.9", making them suitable for spaces with minimal distance between the structural ceiling and the dropped ceiling.

When making a page or announcement using this push-to-talk microphone system, or in the case of an emergency, you won't need to worry about turning off your audio or adjusting inputs or volume. The mixer amplifier includes priority and emergency inputs that will lower the volume or completely stop all other audio transmissions, allowing the paging microphone or emergency voice alarm systems to be heard loud and clear.

The Pure Resonance Audio SP8 SoundPlane is a full-range ceiling tile speaker designed to drop into a 2'x2' suspended grid ceiling without having to cut holes or modify ceiling tiles. This offers a fast, easy, and cost-effective solution that saves installation time, effort, and expenses. A built-in adjustable 70V 10-watt transformer is conveniently accessible and located on the side of the rear back-box. The 2x2 drop-in ceiling speaker contains a full-range 8" treated paper main cone driver, a secondary high frequency cone, with a 10 ounce magnet. The fully enclosed back-can is constructed of industrial-grade steel. The solid white panel with a perforated speaker grille seamlessly blends with the decor in most acoustic drop ceiling tiles. Built-in seismic safety strap tabs are integrated on the steel back-can for suspension mounting from ceiling points (consult your architect or engineer before installing).

The simple to operate Pure Resonance Audio RMA120BT 5-channel commercial rack mount mixer amplifier features 120 watts of high-performance power encased in a slim and lightweight space-saving design. This mixer amplifier provides quick and easy Bluetooth connection as well as the ability to accommodate most input sources like microphones, AV equipment, or computer audio. Adjust the audio levels/settings as well as control the volume to the C3 speakers with the included remote control.
 

Due to the possibilities of FM radio interference and the variables involved, it's not recommended to use FM radio as your primary input source.

The Pure Resonance Audio PTT1 desktop push-to-talk microphone provides excellent performance and reliability, ideal for paging, announcements, general public address, and communication applications. The PTT1 features a uni-directional dynamic gooseneck microphone, table-stand, dual momentary locking switch, 5-foot cable, and three-pin male XLR connector. The durable gooseneck and metal table-stand ensure the PTT1 push-to-talk paging microphone can withstand even the toughest daily use in commercial environments.

RMS Power: 20W @ 8 ohms

Frequency Response: 200Hz - 16kHz

Sensitivity (1M/1W): 92 dB

Nominal Impedance: 8 ohms

Transformer: 70V: 1.3W / 2.5W / 5W / 10W /  8 ohm
                          100V: 2.5W / 5W / 10W /  8 ohm

Speaker Size: 8" Paper Cone

Audio Input: Phoenix Type Pluggable Terminal Block

Grill Type: Square Grill

Mounting Depth: 3.9" (100 mm) 

Dimensions: 23.8" (605 mm) x 23.8" (605 mm) x 3.9" (100 mm)

Net Weight: 13.6 lbs (6.2 kg)

Rated Power Output: 120W

Speaker Outputs: 4 - 16Ω/70V

Frequency Response: 80Hz~16kHz +/- 3dB

S/N Ratio: MIC1, 2, 3: 66dB; AUX1, 2: 85dB

THD: 0.05%

Cooling Mode: Forced fan with variable speed cooling with side entry airflow

Protection: Overheat/Short-circuit

Remote Control: IR remote control with (replaceable) CR2025 3V lithium battery

Dimensions: 1.73" (44 mm) x 19.05" (484 mm) x 11.61" (295 mm)

Weight: 9.92 lbs (4.5 kg)

Polar Pattern: Uni-directional

Frequency Response: 80Hz - 12kHz

Impedance: 600Ω ± 30%

Sensitivity: -72 dB ± 3 dB

Connector: 3-pin male XLR 

Housing: Die-Cast Zinc

Cable: 1.5M (approx. 5')

Dimensions: 6.38" (162 mm) x 4.8" (122 mm) x 14.49" (368 mm)

Weight (without cable): 1.87 lbs (0.85 kg)